12″ x 8″ Hi-Temp Access Door

The F2 Grease Duct Sandwich Access Door is for grease duct applications and meets NFPA 96 standards. Its ceramic fiber gasket allows its use with temperatures up to 2300°F.

Installation Tip — Peel the backing off the template included with the access door and apply to duct in the desired location. Cut around the edge of the template with Metalmaster M6R Offset Snips, cuts left (if right handed) or Metalmaster M7R Offset Snips, cuts right (if left handed).
Loosen the knobs /wing-nuts, but do not remove. Insert the door into the opening at an angle and center the door. Finger-tighten the knobs/wing-nuts. Do not over tighten.